Basically dimmability depends on the bulb used. If the bulb is dimmable the lamp will be too. When purchasing  an LED bulb please make sure it is compatible with your dimmer. Some models in our new UNIBODY series are  supplied with bulbs already included. Please pay attention to the item description. If bulbs are installed [...]

It's hard to answer that in general. It depends on the room size, height and the feel you wish to crate. As a rule of thumb, you can say one lamp per 60 / 80cm table. If the room is 2.5m high, then the smaller models are more likely. If the ceilings are 3m or [...]

The smaller (point-shaped) the light source is, the stronger the shadows, because the light only comes from one direction. A clear light bulb of a conventional type e.g. will create strong stripes because the filament is a very small light source. On the other hand, if you use a globe lamp with a frosted glass [...]

Since the costs for UL certification are very high and the UL listing is only required in the North American market, we have decided against it so far. Our main focus is the european market which is covered by the CE certification system. Usually there are opportunities to get a UL listing with local cooperation [...]

Basically, we can manufacture lights in any color. We can offer dark brown or black lamps with a relatively small surcharge. We have the paint in stock, but so far we manufacture the lamps as individual pieces. If you want an individual color, we can mix it  according to NCS or RAL tones. After notification [...]

Yes, we can also make the lights significantly larger. Example: AION up to approx. 70cm in diameter. The higher weight here requires a different suspension system and thicker material for the rings than we use in series production. Since significantly more material is required and we usually manufacture pieces the pieces individually or in small [...]

Shortening the cables is generally not a problem. Cut off at the desired spot, shorten the textile coating and wrap it with insulating tape. Then (important!) provide the strands again with ferrules or a solder joint. If you are unsure about this, we recommend having the installation carried out by specialists.

This can be achieved in different ways. The easiest (and in most cases also the most charming) way is to install a so-called "monkey swing". Here the cables are installed over a canopy with several cable outlets and led to the desired position via hooks. If you let the cables sag a little, you get [...]

With LED bulbs heat development plays a subordinate role. You can choose color and power according to your purpose. Pay attention to the recommendation of the shape for each lamp model in the product description.  Conventional light bulbs can be used to max. 40W. Stronger bulbs could  pose a danger due to heat development.